List of protocols and ports in BizRobo! Basic

Follow

Below is a list of protocols and ports in BizRobo! Basic.

You can also find this list in the attached document.

①List of communication ports of the default configuration

Sender

Port

Sender Port

Number

Receiver

Port

Receiver Port

Number

Communication

protocol

Use
DS any MC 50080 ※1 HTTP ※2 Connect from the DS terminal to the MC server
DS any DAS 3389 TCP/UDP

Connect via RDP the DS terminal to the DA terminal (case for the Lock Screen function for example)

DS any DAS 49998 ※3 TCP Operate the DA terminal from the DS terminal
DS any DAS 49999 ※3 TCP Operate the DA terminal from the DS terminal (when opening the DA editor)
DAS any MC 50080 ※1 HTTP ※2 Connect DA to the MC server (when starting the DA Service)
RS any DAS 49998 ※3 TCP Operate the DA terminal from the RS server
RS any DAS 3389 TCP/UDP Connect via RDP the RS server to the DA terminal (used in the Lock Screen function for example)
RS any MC 50080 ※1 HTTP ※2 Connect the RS server to the MC server
MC any RS 50000 ※4 TCP ※5 Connect the MC server to the RS server (when RS is connected)
MC/RS any DB 1527 ※6 TCP Communicate from the RS/MC server to the DB server

※1 Tomcat default port; can be changed in the Tomcat settings

※2 Default is HTTP, but connection through HTTPS is possible by changing the Tomcat settings

※3 Default port; can be changed with DAS settings

※4 Default port; can be changed with the RS server settings

※5 Default is TCP; SSL communication is possible by changing the MC server settings

RQL is used as protocol at the application level. Details can be found below.

Communication protocol between MC and RoboServer

※6 Default port for Derby, but relies on the DB (database) type

1.PNG

 

 

②List of the communication ports for the Tomcat settings

Sender Port Sender Port Number Receiver Port Receiver Port Number Communication Protocol Use
DS any MC 8080 ※1 HTTP ※2 Connect the DS terminal to the MC server
DS any DAS 3389 TCP/UDP

Connect via RDP the DS terminal to the DA terminal (used in the Lock Screen function for example)

DS any DAS 49998 ※3 TCP Operate the DA terminal from the DS terminal
DS any DAS 49999 ※3 TCP Operate the DA terminal from the DS terminal (when opening the DA editor)
DAS any MC 8080 ※1 HTTP ※2 Connect DA to the MC server (when starting the DA Service)
RS any DAS 49998 ※3 TCP Operate the DA terminal from the RS server
RS any DAS 3389 TCP/UDP Connect via RDP the RS server to the DA terminal (used in the Lock Screen function for example)
RS any MC 8080 ※1 HTTP ※2 Connect the RS server to the MC server
MC any RS 50000 ※4 TCP ※5 Connect the MC server to the RS server (when RS is connected)
MC/RS any DB 3306 ※6 TCP Communicating from the RS/MC server to the DB (DataBase) server

※1 Tomcat default port; can be changed with RoboServerSettings

※2 Default is HTTP, but connection through HTTPS is possible by changing RoboServerSettings

※3 Default port; can be changed with the DAS settings

※4 Default port; can be changed with the RS server settings

※5 Default is TCP; SSL communication is possible by changing the MC server settings

RQL is used as protocol at the application level. More details below

Communication protocols between MC and RoboServer

※6 Default port for MySQL, but relies on the DB type

2.PNG

3.PNG

 

【Attached document】

BizRobo! Basic protocols and ports list.pdf (Japanese)

2 out of 2 found this helpful

Comments

0 comments

Article is closed for comments.